Explorer 1 was the first satellite of the United States, launched as part of its participation in the International Geophysical Year. The mission followed the first two satellites the previous year; the Soviet Union's Sputnik 1 and 2, beginning the Cold War Space Race between the two nations.
Explorer 1 was launched on January 31, 1958 at 22:48 Eastern Time (February 1, 03:48 UTC) atop the first Juno booster from LC-26 at the Cape Canaveral Missile Annex, Florida. It was the first spacecraft to detect the Van Allen radiation belt, returning data until its batteries were exhausted after nearly four months. It remained in orbit until 1970, and has been followed by more than 90 scientific spacecraft in the Explorer series.
Explorer 1 was given Satellite Catalog Number 4, and the Harvard designation 1958 Alpha 1, the forerunner to the modern International Designator.
Background
First 5 US satellites: United States Space Explorations 1958 NASA; Explorer, Vanguard, Pioneer - video for embedding at http://scitech.quickfound.net/ "The film describes preparation and launch of five satellites and two space probes during 1958. On January 31, a Jupiter [Juno 1] vehicle...
The U.S. Earth satellite program began in 1954 as a joint U.S. Army and U.S. Navy proposal, called Project Orbiter, to put a scientific satellite into orbit during the International Geophysical Year. The proposal, using a military Redstone missile, was rejected in 1955 by the Eisenhower administration in favor of the Navy's Project Vanguard, using a booster advertised as more civilian in nature. Following the launch of the Soviet satellite Sputnik 1 on October 4, 1957, the initial Project Orbiter program was revived as the Explorer program to catch up with the Soviet Union.
Explorer 1 was designed and built by the Jet Propulsion Laboratory (JPL), while a Jupiter-C rocket was modified by the Army Ballistic Missile Agency (ABMA) to accommodate a satellite payload; the resulting rocket known as the Juno I. The Jupiter-C design used for the launch had already been flight-tested in nose cone reentry tests for the Jupiter IRBM, and was modified into Juno I. Working closely together, ABMA and JPL completed the job of modifying the Jupiter-C and building Explorer 1 in 84 days. However, before work was completed, the Soviet Union launched a second satellite, Sputnik 2, on November 3, 1957. The U.S. Navy's attempt to put the first U.S. satellite into orbit failed with the launch of the Vanguard TV3 on December 6, 1957.
Spacecraft design
Explorer 1 was designed and built by the California Institute of Technology's JPL under the direction of Dr. William H. Pickering. It was the second satellite to carry a mission payload (Sputnik 2 was the first).
The total mass of the satellite was 13.37 kilograms (30.80Â lb), of which 8.3Â kg (18.3Â lb) were instrumentation. In comparison, the mass of the first Soviet satellite Sputnik 1 was 83.6Â kg (184Â lb). The instrument section at the front end of the satellite and the empty scaled-down fourth-stage rocket casing orbited as a single unit, spinning around its long axis at 750 revolutions per minute.
Data from the scientific instruments was transmitted to the ground by two antennas. A 60 milliwatt transmitter fed a dipole antenna consisting of two fiberglass slot antennas in the body of the satellite operating on 108.03 MHz, and four flexible whips forming a turnstile antenna were fed by a 10 milliwatt transmitter operating on 108.00Â MHz.
Because of the limited space available and the requirements for low weight, the payload instrumentation was designed and built with simplicity and high reliability in mind, using germanium and silicon transistors in its electronics. A total of 29 transistors were used in Explorer 1, plus additional ones in the Army's micrometeorite amplifier. Electrical power was provided by mercury chemical batteries that made up approximately 40 percent of the payload weight.
The external skin of the instrument section was sandblasted stainless steel with white stripes. Several other color schemes had been tested, resulting in backup articles, models, and photographs showing different configurations, including alternate white and green striping and blue stripes alternating with copper. The final coloration was determined by studies of shadowâ€"sunlight intervals based on firing time, trajectory, orbit, and inclination.
Science payload
The Explorer 1 payload consisted of the Iowa Cosmic Ray Instrument without a tape data recorder which was not modified in time to make it onto the spacecraft. The real-time data received on the ground was therefore very sparse and puzzling showing normal counting rates and no counts at all. The later Explorer 3 mission, which included a tape data recorder in the payload, provided the additional data for confirmation of the earlier Explorer 1 data.
The scientific instrumentation of Explorer 1 was designed and built under the direction of Dr. James Van Allen of the University of Iowa containing:
- Anton 314 omnidirectional Geiger-Müller tube, designed by Dr. George Ludwig of Iowa's Cosmic Ray Laboratory, to detect cosmic rays. It could detect protons with E > 30 MeV and electrons with E > 3 MeV. Most of the time the instrument was saturated;
- Five temperature sensors (one internal, three external and one on the nose cone);
- Acoustic detector (crystal transducer and solid-state amplifier) to detect micrometeorite (cosmic dust) impacts. It responded to micrometeorite impacts on the spacecraft skin in such a way that each impact would be a function of mass and velocity. Its effective area was 0.075 m2 and the average threshold sensitivity was 2.5×10âˆ'3 g cm/s;
- Wire grid detector, also to detect micrometeorite impacts. It consisted of 12 parallel connected cards mounted in a fiberglass supporting ring. Each card was wound with two layers of enameled nickel alloy wire with a diameter of 17 µm (21 µm with the enamel insulation included) in such way that a total area of 1 cm by 1 cm was completely covered. If a micrometeorite of about 10 µm impacted, it would fracture the wire, destroy the electrical connection, and thus record the event.
Flight
After a jet stream-related delay on 28 January 1958, at 10:48:16 PM Eastern Time on 31 January the Juno I rocket was launched, putting Explorer 1 into orbit with a perigee of 358 kilometers (222Â mi) and an apogee of 2,550 kilometers (1,580Â mi) having a period of 114.8 minutes. Goldstone Tracking Station could not report after 90 minutes as planned whether the launch had succeeded because the orbit was larger than expected. At about 1:30Â a.m. ET, after confirming that Explorer 1 was indeed in orbit, a news conference was held in the Great Hall at the National Academy of Sciences in Washington, DC to announce it to the world.
The original expected lifetime of the satellite before orbital decay was three years. Mercury batteries powered the high-power transmitter for 31 days and the low-power transmitter for 105 days. Explorer 1 stopped transmission of data on May 23, 1958 when its batteries died, but remained in orbit for more than 12 years. It reentered the atmosphere over the Pacific Ocean on March 31, 1970 after more than 58,000 orbits.
Results
Explorer 1 changed rotation axis after launch. The elongated body of the spacecraft had been designed to spin about its long (least-inertia) axis but refused to do so, and instead started precessing due to energy dissipation from flexible structural elements. Later it was understood that on general grounds, the body ends up in the spin state that minimizes the kinetic rotational energy for a fixed angular momentum (this being the maximal-inertia axis). This motivated the first further development of the Eulerian theory of rigid body dynamics after nearly 200 yearsâ€"to address this kind of momentum-preserving energy dissipation.
Sometimes the instrumentation reported the expected cosmic ray count (approximately 30 counts per second) but other times it would show a peculiar zero counts per second. The University of Iowa (under James Van Allen) observed that all of the zero counts per second reports were from an altitude of more than 2,000 kilometres (1,200Â mi) over South America, while passes at 500Â km (310Â mi) would show the expected level of cosmic rays. Later, after Explorer 3, it was concluded that the original Geiger counter had been overwhelmed ("saturated") by strong radiation coming from a belt of charged particles trapped in space by the Earth's magnetic field. This belt of charged particles is now known as the Van Allen radiation belt. The discovery was considered to be one of the outstanding discoveries of the International Geophysical Year.
The acoustic micrometeorite detector detected 145 impacts of cosmic dust in 78,750 seconds. This calculates to an average impact rate of 8.0×10âˆ'3 impacts mâˆ'2 sâˆ'1 over the twelve-day period (29 impacts per hour per square meter).
Legacy
Explorer 1 was the first of the long-running Explorer program. A follow-up to the first mission, Explorer-1 [PRIME], was successfully launched aboard a Delta II rocket in late October, 2011. The PRIME was built using modern satellite construction techniques. The orbiting satellite was a backup, since the initial Explorer-1 PRIME, launched on March 4, 2011, failed to reach orbit due to a problem in the launch vehicle.
An identically constructed flight backup of Explorer 1 is on display in the Smithsonian Institution's National Air and Space Museum, Milestones of Flight Gallery in Washington, DC.
Launch Pad 26 was deactivated in 1963, and was designated for use as a museum in 1964, the Air Force Space and Missile Museum. Here too, a full-scale Explorer 1 is on display, but this one is a mockup.
Explorer 1 was the first orbital object to return scientific data. Its launch happened 100 years to the day after the SS Great Eastern was launched. The ship was larger than any that came before it, and accomplished laying the first lasting transatlantic telegraph cable. Both events served to more closely knit the world together.
Gallery
See also
- Timeline of artificial satellites and space probes
References
External links
- Big Picture: Army Satellites - Explorer 1 2 and 3 on YouTube
- NASA images and videos of Explorer 1 and other early satellites
- Data Sheet, Department of Astronautics, National Air and Space Museum, Smithsonian Institution
- A film clip "Army Explorers in Space (1958)" is available at the Internet Archive
- A film clip "Atlas In Orbit. Radios Ike's Message Of Peace To World, 1958/12/22 (1958)" is available at the Internet Archive
- The short film Big Picture: Army Satellites is available for free download at the Internet Archive
- Lecture with detailed evaluation of the Explorer 1 rotation anomaly